To select all objects of the same type, click the Home tab, then choose Select from the Editing section.
You can select the following sets of objects:
· All: Selects all objects.
· All Assistants: Selects all assistant boxes.
· All Co-managers: Selects all boxes that share the same subordinates.
· All Managers: Selects all boxes to which subordinate or assistant boxes are attached.
· All Non-managers: Selects all non-manager boxes.
· Direct Reports: Select the boxes at the level immediately below the selected box.
· Peers: Selects the boxes at the same level as the selected position, which report to the same manager.
· Branch: Selects all boxes that are descendants of the selected box, as well as that box.
· Lowest Level: Selects all boxes that are on the lowest displayed level.
· All Locked Boxes: Selects all boxes that are marked as locked.
· All Hidden Boxes: Selects all boxes that are hidden.
· All Connecting Lines: Select all connecting lines between boxes.
· All Hidden Connecting Lines: Selects all the hidden connecting lines.
· All Auxiliary Lines: Selects all the auxiliary lines.
· All Labels: Selects all labels.
· All Free Floating Objects: Selects all the free floating objects.
· All Anchored Objects: Selects all the free floating objects that are anchored to boxes.
· All Multi-record boxes: Select all boxes that are formatted as multi-record boxes.
· All Single record boxes: Select all boxes that are not formatted as multi-record boxes.
To select a set of objects:
· Click the Home tab and select, then choose an option.