Printing

Here are solutions to common problems you may have when printing from OrgPlus.

Problem

Printing garbage characters.

Possible Solution

·         Reset the printer by turning it off, then back on.

·         Make sure you are using the correct printer driver.

See Also: Page Setup.

Problem

Printing slowly.

Possible Solution

Printing graphics can be slow. You can try printing at lower quality but the output won’t look as sharp.

Problem

Printing boxes without text.

Possible Solution

·         Reset your printer by turning it off and then on. Then try printing again.

·         Make sure you can see the text on your screen.

·         Make sure you are using the correct printer driver.

See Also: Page Setup.

·         Your computer may be running low on memory or resources. Close any other open applications and try again.

See Also: Memory and Resources.

Problem

Printing text without boxes.

Possible Solution

·         Reset your printer by turning it off and then on.

·         If you have chosen not to have box borders, they will not print. See if box borders are visible on screen.

·         Make sure you are using the correct printer driver.

·         Your computer may be running low on memory or resources. Close any other open applications and try again.

Problem

Text is printing outside boxes.

Possible Solution

·         Reset your printer by turning it off and then on.

·         Make sure you are using the correct printer driver.

·         You may be using a font that is not scaling correctly. Try using a TrueType font such as Arial.

·         Your computer may be running low on memory or resources. Close any other open applications and try again.

Problem

Letters are replaced with symbols.

Possible Solution

·         Reset your printing by turning it off and then on.

·         You may be using a symbol font, such as Fences or Wingdings. Try switching to a TrueType font such as Arial.

Problem

Nothing prints.

Possible Solution

·         Reset your printer by turning it off and then on.

·         You may have incorrect settings in Print Setup.

·         Your computer may be running low on memory or resources.

·         If you are using a network printer, the spooler may not be releasing your print job. Be sure that a time-out is set.